About us

We study church architecture — and translate it into stone

IKONASTONE is a workshop in Lutsk that studies the church first and only then turns to the slab. An altar table, an iconostasis or a cross should belong to its space: its period, proportions and light.

We keep a guide to the churches of Ukraine: for every church — its history, type and material, and for most of them our own drawing. What we see in old walls, we carry into new work.

The Annunciation Cathedral in Kharkiv: on the left, a photo of the cathedral; on the right, an IKONASTONE drawing
Church passport from the Guide: photo and our drawing
74churches described in the Guide — with a passport, history and sources
23+ Kyivregions already represented on our map
69original drawings of façades next to the photo of the church
X–XXcenturies: from the Horiany Rotunda in Uzhhorod to the “drunken” church in Chernivtsi
97Guide articles: churches, icons, iconostasis, sanctuary, symbols
30full descriptions of churches: chronology, legends, people, illustrations and independent fact-checking
482illustrations of church history: graphite scenes and archival images
1844sources cited in church entries, with links
3languages: Ukrainian, English, Polish

Figures are counted from the Guide and update with it.

What we do

Three things we never separate

01Research

We study the churches of Ukraine

History, type, material, structure. For every church — a passport and a list of sources, for most — our own drawing. This is how we learn to see what holds form in sacred architecture and what is mere decoration.

Guide
02Design

We draw before cutting stone

Façade, section, profile, joints. We change proportions while it still costs nothing. Decisions are dictated by the canon and the specific church, not by a catalogue.

How we work
03Make

We cut, carve and install

Our own shop in Lutsk: CNC, engraving, hand finishing, polishing, installation. Drawing, shop and installation — in one workshop.

Products
How we describe a church
St Nicholas Church in Chernivtsi: on the left, a photo of the church; on the right, an IKONASTONE drawing

Church passport

Every Guide article opens with a passport — the short facts an architect looks for first. Next to it, a photo and our drawing of the same façade. We check facts against sources and list them under the article.

Place
Chernivtsi, Chernivtsi Oblast
Built
1927–1939; cornerstone consecrated on 2 September 1928, church on 6 December 1939
Type
cross-plan Neo-Romanian church with a central dome and four smaller drums
Material
masonry; tiled roof with ornament
Read about St Nicholas Church
IKONASTONE map of the churches of Ukraine
Map

74 churches on the map of Ukraine

From the Horiany Rotunda in Uzhhorod to the Annunciation Cathedral in Kharkiv. Pick a region to see the churches nearby, each with a passport and history.

Open the map

What matters to us

Four rules you can see in every piece

Canon over fashion

An altar table must be an altar table, not a design object. Its form is defined by the liturgy.

Stone to suit the place

The sanctuary and the churchyard live in different conditions. We choose material for the space, not from a catalogue.

Decisions on paper first

Stone remembers mistakes well. So we make most decisions before the machine.

Less decoration, more precision

A strong piece shows in the detail: a precise joint, a clean profile, the right light.

How the work is organised

Design, workshop and installation under one roof

An altar table, an iconostasis, an icon shrine (kiot), a cross, an icon on stone, a church name plaque: each of these follows the same path with us: drawing, choice of stone, machine, the craftsman's hands, installation. Every stage takes place in one workshop in Lutsk.

This has a plain practical meaning. When one person designs, another cuts and a third installs, there is always room at the joint between them for an error of a few millimetres. In stone, a few millimetres show.

A craftswoman working on two arched icons on stone in the workshop
Work on the icons of the Baptism of the Lord and the Nativity of Christ
Equipment and craft

What the workshop has

  • 01

    Our own workshop

    Cutting, finishing and assembly all happen here in Lutsk.

  • 02

    CNC machines

    Milling of profiles, relief and ornament to the drawing.

  • 03

    Engraving

    Laser and impact engraving: images, inscriptions, fine line work.

  • 04

    Hand finishing

    What the machine leaves to the person: the edge, the transition, the mark of the tool.

  • 05

    Polishing

    The last operation, after which the stone begins to respond to the light.

  • 06

    Installation

    We install in the church and in the church grounds.

Material

The stone we work with

Choosing stone is a question of place, not of taste. An altar table in the sanctuary and a cross in the church grounds live in different conditions.

  • Gabbro

    A deep black. It holds fine engraving and the contrast of an image.

  • Pokostivka

    Light grey, with an even pattern. Calm over large areas.

  • Labradorite

    Dark, with a blue sheen that comes alive in the light.

  • Marble

    Mostly for interiors: a soft light on the surface, delicate carving.

  • Sandstone

    Warm and matt, with a lively, grainy texture. It lends itself well to carving and relief.

  • Artificial stone

    Uniform colour and pattern, for when pieces must be identical.

We also work with other stone; the project determines which.

At work

Workshop and installation

  • Machine saw blade cutting stone, with water cooling the blade

    Cutting stone

  • A craftswoman hand-finishing the lettering on a granite cross with the Image of the Saviour Not Made by Hands

    Handwork: lettering on a cross

  • Icon of the Protection of the Most Holy Mother of God made of several slabs, on the workshop floor

    Icon of the Protection (Pokrova), assembled from separate slabs

  • Stone cross with the Crucifixion on a loader's slings, above the pedestal beside a church

    Installing a cross beside a church

All completed works

Where we are

Lutsk, 89b Lvivska St

Open daily, 09:00–20:00. We take on commissions from all over Ukraine; projects outside Ukraine are discussed individually.

If you are planning an altar table, an iconostasis or a cross now, it is better to begin the conversation with the workshop from the drawing rather than from the stone.

How we work: from brief to installation

First step

Have a project for your church?

Send photos, drawings or a short description. We will discuss the site, the material and the next step.

Discuss a project