Icon shrines

Stone and marble icon shrines (kiots)

We match the stone icon shrine to the icon and the architecture of the church interior.

This piece can be given to a church with a dedication inscription →

Natural stone icon shrine with an icon of the Mother of God: arched frame, twisted columns, plinth with relief; presentation sheet with drawings

An icon shrine (kiot) is a frame, case or niche for an icon that protects it and sets it apart within the church. Icon shrines can be wall-mounted, floor-standing or placed on a façade. A wooden icon shrine suits an interior; a stone one works both inside and on a façade, where wood ages quickly from rain and sun.

Completed work

  • Arched niche shrine in light sandstone with a carved cross at the top

    Sandstone niche shrine

All completed work

Designs

  • Visualisation: floor-standing icon shrine in cream marble — a plinth with a carved rosette, an arched niche for the icon between small columns, a cornice and a cross on top

    Floor-standing icon shrine in cream marble

  • Visualisation: canopy (ciborium) in cream marble with gilding — four columns, arches, a pyramidal roof with a cross; inside, an icon of the Saviour; in front, a stone candle stand with lit candles

    Canopy over an icon of the Saviour, with a candle stand

  • Visualisation: wall-mounted icon shrine in white stone with an ogee top and a cross in a roundel; between small columns, a mosaic icon of the Mother of God with the Child on a gold ground; a shelf on a bracket below

    Wall-mounted icon shrine with a mosaic icon of the Mother of God

  • IKONASTONE illustration: a faceted marble analogion with carved crosses, an icon of the Mother of God with Child on the sloping top

    Stone analogion with an icon

  • IKONASTONE illustration: a rectangular travertine niche icon case with a deep frame and concealed warm lighting, an icon of the Mother of God with Child, a simple cross above

    Contemporary travertine icon case with lighting

  • Visualisation: reliquary shrine in white marble — a rectangular chest with a gabled lid, carved crosses in roundels, palmettes and interlace, on a marble slab

    Reliquary shrine in white marble

  • Visualisation: floor-standing icon shrine in dark red granite — an empty arched niche, columns with gilded vine ornament, a top with small domes and a cross, a plain plinth

    Floor-standing icon shrine in red granite with gilding

  • IKONASTONE illustration: two matching floor-standing white marble icon cases either side of an iconostasis: the Mother of God with Child in one, Christ in the other, in one style with the iconostasis

    Paired icon cases flanking an iconostasis

  • Visualisation: icon shrine in light limestone — a tall plinth with a rosette, a rectangular niche for the icon, a semicircular top with carved foliage and a cross on top

    Icon shrine in light limestone with carving

  • IKONASTONE illustration: a marble tomb with a carved cross and ornament under a columned canopy topped by a cross, with the Epitaphios laid on it

    Tomb for the Epitaphios under a canopy

  • Visualisation: wall-mounted icon shrine in white marble with an icon of the Mother of God with the Child — an arched niche, twisted half-columns, a carved cornice and a shelf on brackets

    Wall-mounted icon shrine with an icon of the Mother of God

  • IKONASTONE illustration: a floor-standing light stone icon case on a granite base: two columns, a triangular pediment with a cross, an icon of the Mother of God with Child, a plain pedestal

    Floor-standing icon case with columns and pediment

  • IKONASTONE illustration: a wall-mounted white marble icon case: an arch with carved ornament and a cross, colonnettes either side of an icon of the Mother of God with Child, a shelf on brackets

    Wall-mounted arched white marble icon case

  • IKONASTONE illustration: a wall-mounted sandstone icon case with grapevine relief on the arch and colonnettes, an icon of the Mother of God with Child, a carved console below

    Carved sandstone icon case

  • IKONASTONE illustration: white marble icon case: an arch with colonnettes, an icon of the Mother of God with Child, a carved stone bowl beneath it, a low step in front

    Icon case with a stone bowl for a lampada

  • IKONASTONE illustration: a wall-mounted cream marble icon case in a Baroque manner: volutes, carved cherubs on the crest, a cross, an icon of the Mother of God with Child, a shaped console

    Baroque icon case with volutes

  • Visualisation: church icon shrine in white marble — twisted columns, an arch with carved foliate ornament, a cross on top; in the niche, an icon of a holy deacon with a censer; a shelf on a bracket below

    Portal icon shrine with twisted columns

  • IKONASTONE illustration: a free-standing sandstone icon case in a churchyard: a gabled stone roof with a cross, colonnettes, an icon of the Mother of God with Child, a pedestal with a cross panel

    Churchyard icon case under a roof

  • IKONASTONE illustration: a rectangular wall-mounted icon case of polished red granite with a moulded cornice and a cross on top, an icon of the Mother of God with Child, a lampada beside it

    Plain red granite icon case

  • IKONASTONE illustration: a sloping icon stand: an icon of the Mother of God with Child in a green marble frame on a carved white marble pedestal with a green inset and a cross

    Marble icon stand (analogion)

  • Visualisation: outdoor icon shrine in white limestone — a plinth with carved interlace, two columns, a gabled pediment with a cross; in the niche, a mosaic icon of St Nicholas

    Outdoor icon shrine with a mosaic icon of St Nicholas

01

Form and proportion

The icon, its frame and the interior work together. The profile, the edge and the joints of the stone are designed before cutting.

How to order

01

We receive your source materials

Photos of the space, dimensions, drawings, references.

02

We clarify the brief

Location, stone, dimensions, canon.

03

We prepare drawings

Façade, section, profile, joints.

04

We agree the design

Production starts only once the drawing is approved.

05

We make the piece

Cutting, CNC, handwork, polishing.

06

We install it

Delivery and installation in the church.

Frequently asked questions

How does an icon shrine differ from a niche?

An icon shrine is a separate piece: a frame or case, with or without glass. A niche is a recess in a wall. A stone icon shrine can be either: a free-standing frame or the surround of a niche on a façade.

Can a stone icon shrine be placed on a church façade?

Yes; on a façade, stone is more suitable than wood. We fix the icon shrine to the wall, and the icon inside is chosen to withstand the outdoors: one made on stone or kept behind protective glass.

What else is an icon shrine called?

An icon case, icon frame, icon niche or kiot (kivot). A sloping stand for an icon in the middle of the church is called an analogion.

How do I order an icon shrine?

Send photos of the space, measurements, drawings (if you have them), reference images and a short description of what is needed. We then clarify the brief and prepare drawings.

Do you make drawings before production?

Yes. The design is worked out on paper first: elevation, section, profile. Production starts after the drawing is approved.

Do you carry out installation?

Yes. The work includes design, production in the workshop and installation in the church. Projects outside Ukraine are discussed individually.

Where is the workshop and how do I get in touch?

The workshop is at 89b Lvivska St, Lutsk, Ukraine. Phone +380 66 892 98 18, daily 09:00–20:00 (Kyiv time); email ikonastone@gmail.com.

First step

Discuss an icon shrine for your church

Send photos, drawings or a short description. We will discuss the site, the material and the next step.

Discuss an icon shrine