Church in Polonka village
The sandstone statue of Christ stands on the church gate again. We did this work free of charge.
The brief
A car drove into the church gate. The statue of Christ fell from its pillar and broke: the head with its halo, the hands and several smaller pieces came off. The parish priest asked us to bring the statue back, and we took it on as charity work: sandstone is softer than granite, and the longer fragments lie out in the open, the harder they are to put back together.
How it was done
01 · After the accidentOn the ground
The figure lay in the bushes by the gate; the hand holding the cross had broken off.
02 · SeptemberFragments in the workshop
In the workshop we laid out every piece: the head with the halo, the hands, the small fragments — to see how they fit.
03 · 18 OctoberBack on the pillar
The restored statue was lifted onto the granite gate pillar and fixed in place.
04 · 18 OctoberThe cross in his hand
The cross went back last.
From fragments to the gate
Fragments in the workshop, the statue on its pillar and the cross back in place — a short video.
Result



The statue on the gate after restoration
The church in Polonka




The church in Polonka village near Lutsk
Can a broken statue be restored?
A stone statue — of Jesus Christ, the Mother of God, an angel or a saint — can often be put back in place after a fall. What matters most is to collect every fragment, even the small ones, and not to wait: the longer the broken stone lies in rain and frost, the worse the edges fit. If this has happened to a statue at your church, send us photos of the fragments and we will tell you what can be done.
Have a project for your church?
Send photos, drawings or a short description. We will discuss the site, the material and the next step.
Discuss a project
